Safe and Light!
SuperFil is made from a proven epoxy resin and an MDA-free hardener that allows us to ship it as non-HAZMAT. We add microballoons and other high quality fillers to achieve the peak of structural performance and lightness. SuperFil weighs 15 ounces per mixed Quart! Excellent for fillets or large holes, mixes at the consistency of peanut butter.
Strong and Stable
SuperFil is twice as strong as automotive fillers with about one-third the weight. And SuperFil is ALL EPOXY and WILL NOT SHRINK! SuperFil can be easily primed with epoxy primer.
Consistent Quality
Because SuperFil is made in large lots to rigid standards, you get the same consistent texture every time, with no annoying batch inconsistencies common with hand-mixed filling slurries.
Excellent Sandability
Curing time to sand from 8 hours to overnight, depending upon temperature. When cured, SuperFil sands far more easily than any other epoxy filler.
Easy Application
SuperFil will settle in storage, so stir part A and part B individually before mixing. For best results, mix SuperFil by weight, 2 parts A to 1 part B. Blend thoroughly until the mixture has an even light blue color with no streaks. Apply with a squeegee to desired thickness. Apply peel ply and squeegee directly over the peel ply for maximum final smoothness. Remove peel ply when cured, and sand.
Pot life at 77 degrees is 60 minutes. Cures to sandibility at 77 degrees in 12 hours.
Like a “Bondo” Light Enough For Model Aircraft!
You must be logged in to post a comment.